Here is some information regarding newer PVA cards for the IPKII are Lot#G. These cards come pre-loaded from the NEC Warehouse with Service Pack SP01Y.

DO NOT attempt to downgrade these cards to a Service Pack below this level.

Issue: When a CCPU-Us is new there is a 60 day license which enables all 16 ports of the UM8000. The desire is to have the UM8000 only take up the licensed number of ports during the initial 60 day license period…

Programming:

1. Press idle CALL key.
2. Dial 828.
3. Dial the password (normally 0000).
4. Dial two digits for the year (e.g., 92)…

Programming:

1. Press idle CALL key.
2. Dial 828.
3. Dial the password (normally 0000).
4. Dial two digits for the year (e.g., 92)…

Did you know that NEC’s latest voice mail platforms like the IM16-LX for the 2000 IPS or the EliteMail LX for the IPKII run on a Red Hat version of Linux?
So it didn’t come to any surprise that the web administration interface is provided through a version of the Apache web server. http://www.apache.org/
Interestingly, I was a little surprised that NEC didn’t document how to change the listening port for the installing and maintaining technicians out there.
By default, the system uses the basic defaults:
http = tcp port 80
https = tcp …

NEC IPKII

To set the system Time:

Electra Elite 48 / 192 / IPK / Electra Professional I / Electra Professional II

MARK 2

The Clock/Calendar can only be set from the Attendant Multiline Terminal.

* 1. Press “CNF”
* 2. Press *
* 3. “CNF” LED flutters
* 4. “PROGRAM CLOCK HOUR ??” is displayed on LED
* 5. Press Hour Setting (example 0,8)
* 6. Press DSS Key 20…

NEAX 1000 / 1400 / 2000 IVS / 2000 IVS-2 / 2000 IPS
With Dterm Series III, Series E and Series i Phones
CAT Mode Procedure: This is to be done while the phone is in an idle state.

# 1. Press “TRANSFER”
# 2. Press “CONF”
# 3. Press *
# 4. Press “TRANSFER”
# 5. Press “CONF”…