Articles in the NEC Category
2000 IPS, Featured, IPK, IPKII, NEC, Phone Systems, SV8100, SV8300 »
As you may have already figured out by reading my articles over the past few years, I have been working with NEC Key and PBX systems…
IPK, NEC, Phone Systems, Tutorials »
I was recently asked through a support forum how to administer an older model NEC Elitemail system via computer. The new IT person was taking over an Electra Elite IPK telephone system with an Elitemail “in-skin” voicemail system and the company he worked for wanted to offer employee directory look up through option 1 of their main auto attendant greeting.
DSX, NEC, Phone Systems »
For those of you that do not know, the NEC DSX platform is a pretty inexpensive system that packs a heck of a lot of value. I’ve only put a few of these puppies out in the field but the installation and use is pretty painless. However, I did come accross an issue with the Caller-ID…
IPK II Field Reports, IPKII, NEC, NEC Cheat Sheets, News, Phone Systems, Tips »
Here is some information regarding newer PVA cards for the IPKII are Lot#G. These cards come pre-loaded from the NEC Warehouse with Service Pack SP01Y.
DO NOT attempt to downgrade these cards to a Service Pack below this level.
Call Center and Voicemail, NEC, NEC Cheat Sheets, Phone Systems, Tutorials, UM8000 »
Issue: When a CCPU-Us is new there is a 60 day license which enables all 16 ports of the UM8000. The desire is to have the UM8000 only take up the licensed number of ports during the initial 60 day license period…
NEC, NEC Cheat Sheets, Phone Systems, Time Change Instructions, UX5000 »
Programming:
1. Press idle CALL key.
2. Dial 828.
3. Dial the password (normally 0000).
4. Dial two digits for the year (e.g., 92)…
Aspire, NEC, NEC Cheat Sheets, Phone Systems »
Programming:
1. Press idle CALL key.
2. Dial 828.
3. Dial the password (normally 0000).
4. Dial two digits for the year (e.g., 92)…
2000 IPS, Call Center and Voicemail, NEC, Phone Systems, Zeacom »
Ok folks, I had a trouble ticket open regarding a particular client that could not use the call forward all feature without recieving the recording “You must first dial one plus seven one four…”. The client presumed that the access code was being sent twice resulting in 9,91714…
IPKII, NEC, Phone Systems »
OK, folks once again I seemed to have stumbled upon a limitation and have been awaiting resolution from my techy guys for about 3 weeks now.
First, let’s introduce you to the basic idea which I found what could be and I feel most likely is a bug. For the record, the current stable release for the IPKII is 1.62 (unless you purchase the 2.+ version for enhanced networking features). **this has not been tested on 2.+ versions**
Situation: Mary is leaving the office for a week of seminars and she wants to have Kathy take her calls when possible. Mary doesn’t want …
