You can click the following link to enhance the reading of this article: Reading Blinds.

Toshiba DK 40, DK40i, DK280, DK424 and DK424i

Program name and extension in display:

• DO NOT LIFT THE HANDSET
• Press intercom button “#” key & “621“.
• Press the “#” key to access alpha characters.
• Press “*” or “1” to move the cursor to the desired position.
• Press the button that has the letter you wish to enter. Use the “0 key to shift from letter to letter on the button.
• If you would like to enter a number, press the “#” key to change from alpha characters to numeric. Press the “#” key again to return to alpha.
• The following special characters are set by pressing “1” and then pressing “0” to step through the available characters: Q Z : + – /
• When you have finished entering all of your information press “Redial then Spkr” to complete your programming transaction.

Detailed features:

• The “1” button moves the cursor to the right; it is also used to access special characters and to enter “blanks” in the alpha mode.
• The “*” key moves the cursor to the left.
• The “#” key alternates between alpha and numeric characters.
• Each button on your keypad has three letters that are used in messaging/programming user name & ext. The “0” button is used to shift between the three letters on each alpha button; it is also used to access special characters as explained above.

If you enjoyed this post, make sure you subscribe to my RSS feed! You can also subscribe by Email and have new posts sent directly to your inbox. When you feel bored, follow me on Twitter.