NEC 1000/2000 Time Change Instructions
13 September 2007
View Comments
You can click the following link to enhance the reading of this article: Reading Blinds.
NEAX 1000 / 1400 / 2000 IVS / 2000 IVS-2 / 2000 IPS
With Dterm Series III, Series E and Series i Phones
- CAT Mode Procedure: This is to be done while the phone is in an idle state.
- 1. Press “TRANSFER”
- 2. Press “CONF”
- 3. Press *
- 4. Press “TRANSFER”
- 5. Press “CONF”
- 6. Press #
- 7. “CAT MODE” displayed on LCD
- 8. Press “REDIAL or LNR/SPD”
- 9. “COMMAND” displayed on LCD
- 10. Press 02
- 11. Press “RECALL”
- 12. Press 2
- 13. Press “RECALL”
- 14. “02>2>Current Time” displayed on LCD
- 15. Input correct time using military time (HH MM SS)
- 16. Press “CONF”
NEAX 1000 / 1400 / 2000 IVS / 2000 IVS-2 / 2000 IPS
With Dterm Series II Phones
- CAT Mode Procedure: This is to be done while the phone is in an idle state.
- 1. Press “TRANSFER”
- 2. Press “HOLD”
- 3. Press *
- 4. Press “TRANSFER”
- 5. Press “HOLD”
- 6. Press #
- 7. “CAT MODE” displayed on LCD
- 8. Press “SPEAKER”
- 9. “COMMAND” displayed on LCD
- 10. Press 02
- 11. Press “ANSWER”
- 12. Press 2
- 13. Press “ANSWER”
- 14. “02>2>Current Time” displayed on LCD
- 15. Input correct time using military time (HH MM SS)
- 16. Press “HOLD”










