You can click the following link to enhance the reading of this article: Reading Blinds.

Trouble Summary:
Privacy Release not working properly for Virtuals

Trouble Symptom:
Privacy release not working properly on virtuals with CM 08 522 set to a “0″.

Programming example:

Dterm Stations 200 and 201 have a common virtual of 300 appearing on both phones. Incoming trunk call lands on virtual extension 300. Station 200 picks up the call, the corresponding line key is lit green, on station 201 the corresponding line key is lit red. Station 201 presses the line key and is now conferenced with station 200 and the outside call. Station 201 hangs up. Then station 201 attempts to pick up the line key again to join the conversation and gets dial tone. When station 201 hangs up the call the LEDs on both phones go blank. The call is still in progress on station 200.

Modification Treatment:
Issue resolved with MP revision M1 1.04 and above.
• S/Revision:M1 0.18 Fix Revision: M1 1.04

[email_link]



[ratings]